replace gas tank sheild 1999 jeep grand cherokee

Open draincock and drain coolant from radiator. Put the other end into a clean container. Attach one end of a hose to the draincock. With engine cold, locate radiator draincock on the right lower side of radiator facing to rear of vehicle.Ģ. WARNING: DO NOT REMOVE THE CYLINDER BLOCK DRAIN PLUGS OR LOOSEN THE RADIATOR DRAINCOCK WITH SYSTEM HOT AND UNDER PRESSURE. Radiator hose constant tension clamp - size locationĤ.0L engine - Draining the cooling system IF REPLACEMENT IS NECESSARY, USE ONLY AN ORIGINAL EQUIPMENT CLAMP WITH MATCHING NUMBER OR LETTER. A NUMBER OR LETTER IS STAMPED INTO THE TONGUE OF CONSTANT TENSION CLAMPS. ALWAYS WEAR SAFETY GLASSES WHEN SERVICING CONSTANT TENSION CLAMPS. SNAP-ON CLAMP TOOL p/n HCP20 MAY BE USED FOR LARGER CLAMPS. WHEN REMOVING OR INSTALLING, USE ONLY TOOLS DESIGNED FOR SERVICING THIS TYPE OF CLAMP, SUCH AS SPECIAL CLAMP TOOL MILLER p/n 8495A. WARNING: CONSTANT TENSION HOSE CLAMPS ARE USED ON MOST COOLING SYSTEM HOSES.

The spring type hose clamp applies constant tension on a hose connection. The worm type hose clamp uses a specified torque value to maintain proper tension on a hose connection. If replacement is necessary, use only a original equipment clamp with matching number or letter. If a spring type clamp replacement is necessary, replace with the original Mopar equipment spring type clamp.ĬAUTION: A number or letter is stamped into the tongue of constant tension clamps.

The cooling system utilizes both worm drive and spring type hose clamps. The unnoticeable performance gain, if any at all, is simply not worth the potential drawbacks. Doing so is not recommended, it will give you colder heat in the winter and may interfere with engine performance.Ī thermostat rated lower than the factory thermostat will richen your fuel mixture a bit at the expense of gas mileage, increased exhaust emissions and dirtying your oil faster - not to mention shortening the life of your cylinder walls and catalytic converters and more frequent spark plug changes. No benefits or performance gains can be realized by installing a 'cooler' thermostat into a stock engine. When replacing a thermostat it is very important to install one with the same temperature rating (the only exception might be with certain performance modifications or chips that recommend or require a different temperature thermostat). Jeep Grand Cherokee WJ - Cooling system serviceīoth the 4.0L and 4.7L engines use 195° thermostats for all model years from 1999-2004.

Replace gas tank sheild 1999 jeep grand cherokee